Home
Products
Exhaust Pipes
F.A.Q's
Why Tankless?
Maintenance
Troubleshooting
Dealers
Warranty
Shipping
Reviews
About Us
Contact
Conventional Heaters
Manuals
EZ Tankless Articles
Tankless News
Videos / Photos
Partner Links
Blog
PHCC Directory
Call or Chat with SKYPE
EZ DELUXE - Indoor Tankless Water Heater
EZ Deluxe Tankless Water Heater - $474.95
Includes Free Shipping and Direct Vent Flue Pipe Kit*
*NOTE: Included Intake/Exhaust is enough to pass straight through an exterior wall.
| Natural Gas Model | LP Gas Model |
Special - Refurbished EZ Deluxe - Save $100 - Now Only $374.95 |
|
| Our Refurbished EZ Deluxes have been serviced and repaired as necessary to bring them back to like NEW condition. These heaters may have slight cosmetic damage but carry the same guarantee and warranty as if new. | |
| Natural Gas Refurbished Model | LP Gas Refurbished Model |
 PLEASE READ - Things to consider before purchasing a tankless hot water heater. |
|
| Dimensions Of Included Exhaust Pipe | |
 |
 |
There are extensions available, but the EZ Tankless Direct Vent Intake/Exhaust can not be longer than 2 Meters (6.5ft) in total length. Click here for more information including detailed exhaust and installation requirements. |
|
| 1 - Meter Direct Vent Extension Pipe | Half Meter Direct Vent Extension Pipe |
.jpg) |
|
| $73.95 |
$39.95 |
| EZ Tankless Recommends Installing a Pre-Sediment Filter and Service Valves to complete an ideal installation. | |
 |
 |
| Service Valves - $139.00 | Sediment Filter - $24.95 |
EZ DELUXE - Features and Benefits
- There are more expensive and much more complicated models on the market, but this technology is rapidly turning toward these compact type units with direct exit concentric intake/exhaust technology.
- EZ tankless heaters are designed for the typical American home. Affordable, easy to install, and efficient. An EZ Tankless heater can eliminate a large portion of your home's stand-by energy loss which saves precious energy and money.
- Please note: This heater must exit horizontally. (Typically from an exterior wall mounted location) But with this simple and effective system, there is no need for a roof rain cap, complicated condensation drain apparatus, anti-freeze/back-draft trap door, or room air cubic feet calculations. Your installation technician can mount this unit to an exterior wall, place one hole into the wall for the Stainless Steel horizontal-exit direct-vent concentric pipe and in no time, you'll be up and running. No need to calculate what exhaust components you need and order them separately at additional cost as we furnish free of charge* the basic system that works for 90% of exterior wall mount applications. To find out more about this modern and innovative way to heat your water, click here.
*Standard exhaust system is free of charge, additional components may be purchased at minimal cost.
- Extensively tested in our USA laboratory and in our own homes, this model delivers up to 4.0 gallons per minute (at a 60F temperature rise) of consistent and continuous hot water. This unit is an excellent choice for conservative minded persons living in homes with one or two baths.
- This model features our advanced sealed double-chamber forced air intake - exhaust system.
- Fully-automatic operation. Simply turn on the water spigot or shower, hot water will arrive in a few moments. After the tap is turned off, the tankless heater will automatically extinguish itself.
- Key Touch water temperature settings and on-off switch with easy to understand advanced technology display.
- Special sealed chamber forced air intake and exhaust pipe (flue). The exterior of the sealed dual-chamber stainless steel "flue" pipe system is for the arrival of intake or combustion air. The interior chamber is the forced air exhaust. With this advanced feature, the exterior surfaces of the flue are cooled by the incoming combustion airflow. In addition to a much cooler flue pipe exterior, the intake air is taken from outside the home. This method eliminates the potential for back draft of your furnace or gas dryer, as well as preventing escape of furnace supplied heating or air conditioning which can be drawn out of the home by tankless heaters which use "room-air combustion intake" designs.
- Featuring a “proportional control valve for electricity and gas”. According to the changing parameter’s of the temperature sensor in the hot water outlet pipe, the micro-chip automatically and instantaneously signals the proportioning valve to adjust the gas volume, keeping the hot water temperature constant.
- Aesthetically pleasing and simple design features make this unit easy to use and install as well as unobtrusive if located within view of working or living spaces.
- Electronic control system via computer chip is advanced and extremely reliable. This "No pilot light" design is safe and convenient, using automatic ignition to further your energy savings.
- Featuring a precise and safe water flow sensor to stabilize the exit water flow.
- Independent control of water flow and gas flow making it easy to regulate the water temperature.
- If the water supply is interrupted, the gas valve will automatically turn off.
- High thermal efficiency and superb combustion performance.
- With double proportional valves for winter and summer, the inlet water temperature range is much wider.
- Low water pressure ignition. The heater can function at 35 PSI water pressure. Making this unit suitable for users living at high altitude or those using well water with older or less powerful pumping systems.
- Automatic adjustment of the gas supply and exhaust fan rpm coordinated with the water temperature setting and available water volume, saves even more gas and water.
- Implementing the latest in Advanced Intelligence (AI) design, when restarting, the computer system automatically remembers the temperature settings entered at last use instead of resetting.
Easy to use key touch controls can preset the desired water temperature before use, making this unit more convenient.
(For your reference, normal bath water temperature is about 105°F.)
A Simple Install of the EZ DELUXE model by the fellas at EZtankless.com
| Model | EZDELUXE |
| rated heat input (kW) | (25kW) 87,500 btu |
hot water supply (GPM) (for 45°F temp. rise) |
3.4 GPM (45 °F rise) |
| size | 22.3" x 13.4" x 4.9" |
| water pressure (PSI) | 35 - 100 PSI |
| thermal efficiency rating | 88% |
| gas type & rated gas pressure Pa (PSI) (WCI) | LPG 2800 (0.46) (11"WC)/NG 2000 (0.29) (8"WC) |
| Voltage (V) | AC110V 60HZ |
| packing size | 29.5" x 17.7" x 8.9" |
| G.W./N.W. kg (U.S. Pounds) | 15.5/14 (34/31 lbs.) |
Please view this page for a further understanding of the parts and their purpose.
