EZ Tankless Recommends Installing a Pre-Sediment Filter and Service Valves to complete an ideal installation.
Service Valves - $139.00
Sediment Filter - $19.95
EZ202 Outdoor - Features and Benefits
WARNING: If installing this unit indoors in cold climates there is risk of backdraft which can cause the internal water pipes in the heat exchanger to freeze, crack, and leak.
WARNING: This unit requires a minimum room combustion air "unconfined" space of 4050 cubic feet. This is why we refer to this unit as being designed for outdoor use. Be safe, when mounting a tankless heater indoors, always use a direct vent model like our EZ-DELUXE.
DISCLAIMER: EZ Tankless accepts no responsibility for a unit that is damaged because of improper installation or freezing.
Fully-automatic operation. Simply turn on the water spigot or shower, hot water will arrive in a few moments. After the tap is turned off, the tankless heater will automatically extinguish itself.
Aesthetically pleasing and simple design features make this unit easy to use and install as well as unobtrusive.
No plug-in is required. The "No pilot light" design is safe and convenient, using automatic ignition to further your energy savings. (The ignition electrical source is supplied by two "D" cells)
Sensitive ion flame sensor will cut the gas supply if the flame goes out
unexpectedly.
Insufficient water pressure protection.
The 20-minute safety timer reduces the risk of carbon-monoxide poisoning if improperly ventilated.
Featuring a precise and safe water flow sensor to stabilize the exit water flow.
Independent control of water flow and gas flow making it easy to regulate the water temperature.
If the water supply is interrupted, the gas valve will automatically turn
off.
High thermal efficiency and superb combustion performance.
With a three position winter-summer switch and double proportional valves, the inlet water temperature range is much wider.
Low water pressure ignition. The heater can function at 20 PSI water pressure. Making this unit suitable for use at high altitude or those using well water with older or less powerful pumping systems. For example; As tested in our USA laboratory, this unit can easily operate via a garden hose inlet water supply.
Easy to use controls can preset the desired water temperature before use, making this unit more convenient.
(For your reference, normal bath water temperature is about 105°F.)